@Dryflyphotography
Life of the Party
Forum Supporter
- Jan 17, 2024
- #41
now you're talking' Steve!
Bambooflyguy
Life of the Party
- Jan 17, 2024
- #42
Still talking and thinking Ron……but nothing else on the drawing board! Has potential though…..
iveofione
Life of the Party
Forum Supporter
- Jan 18, 2024
- #43
Bambooflyguy said:
Still talking and thinking Ron……but nothing else on the drawing board! Has potential though…..
Hmm-the military uses stealth aircraft made out of "plastic". The bamboo models they made all showed up on radar as pandas.
T
Triggw
Steelhead
- Jan 18, 2024
- #44
Salmo_g said:
5' Zebco spincast and a slip bobber. After surveying all the equipment variations used for so called high falutin' chironomid fishing, I realized that going back to what many of us started out with is perhaps the most efficient bobber fishing tool of all.
Don't see how you can move enough line on a strike to set the hook. Especially if it's down there 15 or 16 feet. Or get enough leader off the water to cast.
Bambooflyguy
Life of the Party
- Jan 18, 2024
- #45
Triggw said:
Don't see how you can move enough line on a strike to set the hook. Especially if it's down there 15 or 16 feet. Or get enough leader off the water to cast.
I’ll give it a shot and let you know……but I typically fish 9’-10’ max under the indicator. I miss way more than I catch with my regular setup anyway!
Salmo_g
Legend
Forum Supporter
- Jan 19, 2024
- #46
Triggw said:
Don't see how you can move enough line on a strike to set the hook. Especially if it's down there 15 or 16 feet. Or get enough leader off the water to cast.
". . . slip bobber . . ."
T
Triggw
Steelhead
- Jan 19, 2024
- #47
Salmo_g said:
". . . slip bobber . . ."
All the slip bobbers I've used are tight to the line--at the required distance above the fly to drop it to the right depth--until you set the hook (or miss a strike). I.e., if you want the fly to be14 feet deep, you've got to have 14 feet of line *below* the slip bobber. If you know of one that can ride near the fly during the cast and then let the fly drop to some set point, I'd like to know about that.
clarkman
average member
Forum Supporter
- Jan 19, 2024
- #48
maybe they should be called sliding bobbers with a little bobber stopper tight on the line that casts through everything nicely.
Bambooflyguy
Life of the Party
- Jan 19, 2024
- #49
There’s a difference between a slip bobber and a quick release bobber…..
T
Triggw
Steelhead
- Jan 19, 2024
- #50
Bambooflyguy said:
There’s a difference between a slip bobber and a quick release bobber…..
OK, tell me about slip bobbers. This sounds like something I need.
Bambooflyguy
Life of the Party
- Jan 19, 2024
- #51
Triggw said:
OK, tell me about slip bobbers. This sounds like something I need.
Slip bobbers are typically used on gear rods. Basically just a bobber that free slides on the line with a fixed bobber stop above and a swivel below. This allows it easier to cast and net the fish while it’s set at a designated depth. Unlike a quick release bobber that crimps the line set at a certain depth, then releases when a fish hits or in my case it releases prematurely while casting…..
SurfnFish
Legend
Forum Supporter
- Jan 19, 2024
- #52
Triggw said:
OK, tell me about slip bobbers. This sounds like something I need.
set the indicator to the appropriate depth, fish strikes, it immediately breaks loose so the indicator doesn't interfere with reeling in the fish.
Here's Phil Crowley well explaining the set-up.
T
Triggw
Steelhead
- Jan 19, 2024
- #53
SurfnFish said:
set the indicator to the appropriate depth, fish strikes, it immediately breaks loose so the indicator doesn't interfere with reeling in the fish.
Here's Phil Crowley well explaining the set-up.
No, I got that. That's what @Bambooflyguy is calling a quick-release bobber, which I'm very familiar with. I'll look into "slip bobbers" more, but it doesn't sound like it would work for deep nymphing on a fly rod. Thanks for the info, though.
Bambooflyguy
Life of the Party
- Jan 19, 2024
- #54
Yes, the quick release indicator is Phil Rowley’s. I’ve used these as slip bobbers with a small piece of rubber band as a bobber stop. But I’d rather fish shallower with a fixed indicator.
Wayne Kohan
Life of the Party
- Jan 19, 2024
- #55
Bambooflyguy said:
or in my case it releases prematurely while casting…..
I think they call that premature indication, you should see a doctor for that
Bambooflyguy
Life of the Party
- Jan 19, 2024
- #56
Wayne Kohan said:
I think they call that premature indication, you should see a doctor for that
Now that’s funny right there!! Dr Feelgood?
Irafly
Life of the Party
Forum Supporter
- Jan 21, 2024
- #57
Triggw said:
No, I got that. That's what @Bambooflyguy is calling a quick-release bobber, which I'm very familiar with. I'll look into "slip bobbers" more, but it doesn't sound like it would work for deep nymphing on a fly rod. Thanks for the info, though.
I’ve tried true slip bobbers, but unfortunately, flies don’t tend to be heavy enough to overcome the friction of the line passing through the bobber and to over come the surface tension of the leader left on the water behind the bobber. That and I don’t like using split shot. The line will eventually pull through with a heavy enough fly, but it takes a long time.
Chris Johnson
Steelhead
- Jan 27, 2024
- #58
I use an Echo Ion 10' 5wt and an Anadro line, works great. I've been pondering a Linear 1040 in 5 0r 6wt.
_WW_
Geriatric Skagit Swinger
Forum Supporter
- Jan 30, 2024
- #59
Last season I used a 3wt 11' Echo TR with a 6wt Anadro line. Cuts down on the rodeo casting with long leaders and eliminates false casting with shorter ones. This year I'll have two 3wt trout speys.
W
wetline dave
Steelhead
- Jan 31, 2024
- #60
I use the same 6 wt rod for everything, a V2 Scott and just 3diffeent lines, a WF floater, a sink tip, and a type 5 full sinking line.
And surprise surprise I seem to catch fish just fine and generally as well or better than other around me. I guess refuse to buy into the manufacturers hype of needing a different rod for every style of fishing.
Baah Humbug!!
Dave
You must log in or register to reply here.